[rbridge] Use of 802.1ah Encaps

[Gray, Eric]

Don,

	Thanks for doing this.  As you can probably attest, this
is a non-trivial "digging" task to come up with this level of
detail.  I am not sure why Joe asked for it, but now that you
have provided it, perhaps you can explain how values would be
derived for the B-TAG TCI/VID and I-TAG TCI/SID fields if we'd
like to deploy this technology in "plug-and-play" mode?

--
Eric

> -----Original Message-----
> From: Don Fedyk [mailto:dwfedyk at nortel.com] 
> Sent: Thursday, December 07, 2006 8:29 AM
> To: Joe Touch; Ali Sajassi (sajassi)
> Cc: Gray, Eric; Developing a hybrid router/bridge.
> Subject: RE: [rbridge] Use of 802.1ah Encaps
> 
> Hi 
> 
> This is the Provider Backbone Header Format reproduced from one of the
> 802.1ah documents.  When I said this is similar to the Trill 
> header this
> is the version I mentioned.  I converted to textographics by hand so I
> hope I got it right. I put field designators in [] inside the picture
> for fear they would get wrapped. The encapsulated frame 
> starts after the
> I-TAG I-SID.
> 
>     
>     |      1        |       2       |       3       |       4 
>       |  
>     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
>  -2 |                               |                               |
>     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+                               +
>   2 |                Backbone Destination Address         [B-DA]    |
>     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
>   6 |                Backbone Source Address              [B-SA]    |
>     +                               +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
>  10 |                               |   .1ad Ethertype    [B-TAG]   |
>     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
>  14 |  .1ad B-TAG TCI/VID           |   .1ah Ethertype    [   ]     |
>     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-[ I ]-+-+-+
>  18 |               .1ah I-TAG TCI/SID                    [ - ]     |
>     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-[ T ]-+-+-+
>  22 |                Customer Destination Address         [ A ]     |
>     +                               +-+-+-+-+-+-+-+-+-+-+-[ G ]-+-+-+
>  26 |                               |                     [   ]     |
>     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+                     [   ]     +
>  30 |                Customer Source Address              [   ]     |
>     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-[   ]-+-+-+
>  34 |  Encap Ethertype              |                     [   ]
>     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
> 
> 
>                                 .1ah I-TAG TCI
>     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
>     | P/DE  |R1 |R2 |                     I-SID                     |
>     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
> 
>     P/DE 3 Bits Priority 1 bit Drop Eligible
>     R1 Res1
>     R2 Res2
> 
> a) priority - This 3 bit field carries the customer priority (I-PCP)
> associated
> with this frame. The provider network operates on the priority
> associated with
> the B-TAG.  
> 
> b) drop_eligible - This 1 bit field carries the customer drop
> eligibility
> (I-DEI) associated with this frame. The provider network 
> operates on the
> drop
> eligibility associated with the B-TAG.  
> 
> c) res1 - This 2 bit field is used for any future format 
> variations. The
> res2
> field is zero on transmit and is ignored on receipt. 
> 
> d) res2 - This 2 bit field is used for any future format 
> variations. The
> res1
> field is zero on transmit and if set on reception the frame is
> discarded.  
> 
> e) I-SID - This 24 bit field carries the service instance identifier
> associated
> with this frame.  
> 
> f) encapsulated C-DA - This field carries the 48 bit Destination MAC
> Address
> for an encapsulated Ethernet frame.  
> 
> g) encapsulated C-SA - This field carries the 48 bit Source 
> MAC Address
> for an
> encapsulated Ethernet frame.  
> 
> Regards,
> Don
> 
> 
> > -----Original Message-----
> > From: Joe Touch [mailto:touch at ISI.EDU] 
> > Sent: Wednesday, December 06, 2006 9:53 PM
> > To: Ali Sajassi (sajassi)
> > Cc: Fedyk, Don (BL60:1A00); Gray, Eric; Developing a hybrid 
> > router/bridge.
> > Subject: Re: [rbridge] Use of 802.1ah Encaps
> > 
> > I'd really rather someone just posted the header / fields, 
> > rather than a large document in which that information is 
> > buried, if possible ;-)
> > 
> > Joe
> > 
> > Ali Sajassi (sajassi) wrote:
> > > 
> > >> Can you - or anyone with easy access to the specs - 
> please post an 
> > >> explicit description of 802.1ah header and fields?
> > > 
> > > I will ask Tony (802.1 chair) to make avail to TRILL WG a 
> > copy of .1ah.
> > > 
> > > -Ali
> > > 
> > > 
> > >> Thanks,
> > >>
> > >> Joe
> > >>
> > >>
> > 
> > --
> > ----------------------------------------
> > Joe Touch
> > Sr. Network Engineer, USAF TSAT Space Segment
> > 
> > 
>